Clipsal 5400 Series Guide de l'utilisateur télécharger pdf (Page 15)

Clipsal 5400 HomeSafe Security Panel - USER Guide

RADIO KEY OPERATION

CLIPSAL RADIO KEY 3 BUTTON

The optional Clipsal Radio Key allows you to Arm, Disarm and

activate PANIC. The Radio Key can also Arm Monitor Mode, (if this

has been enabled by your installer).

ARMING

Press the ON button.

• The keypad will give 3 beeps.

• The outside siren will give 1 ‘chirp’. (If enabled by your installer)

• The strobe light will flash briefly

DISARMING

Press the OFF button.

• The keypad will give 3 beeps.

• The outside siren will give 3 ‘chirps’. (If enabled by your installer).

• The strobe light will flash briefly.

ARMING MONITOR MODE

Press the OFF button twice within 4 seconds.

• The keypad will give 9 beeps.

• The outside siren will NOT ‘chirp’.

• The strobe light will flash briefly.

PANIC

Press and hold the PANIC button for at least 4 seconds.

• The siren and strobe will activate, (If enabled by your installer)

• The dialler will report a Panic alarm, (If enabled by your installer

and if your system is monitored by a central station).

Press the OFF button to reset a Panic alarm

* The Clipsal Radio Key is optional and is not supplied with any Clipsal HomeSafe

panels as standard

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 26 27

Pas de commentaire

Clipsal 5400 Series Guide de l'utilisateur Page 15