Clipsal 5800WCGA Informations techniques télécharger pdf (Page 35)

TECHNICAL INFORMATION

227

C-Bus Learn Units Quick Programming Guide

Press one key for a single

operated dimmer.

toggle dimmer

Exit Learn mode by pressing any toggle switch on

a Dimmer Output Unit for 2 seconds.

C-Bus2 will now Learn the relationship and will return to

normal operation.

Units and C-Bus Indicators will stop flashing.

Press two keys on the

same unit for two key

operated dimmer. The

first key pressed will be

an on/up key and the

second key pressed will

be the off/down button.

on/up

off/down

on/up

off/down

Hold down a key until the

indicator comes on, then

release the key.

The key switch will flash at one second intervals.

Note: Exiting Learn Mode at this point will make the key

a 5 second timer.

Exit Learn Mode by pressing any toggle switch on a Relay

or Dimmer Output Unit for 2 seconds.

C-Bus2 will now Learn the relationship and will return to

normal operation.

Units and C-Bus Indicators will stop flashing.

Continuing to hold down the key will cause the indicator

to double flash every one second.

Each double flasah represents 5 minutes.

For example, releasing the key after 4 double flashes gives

a 20 minute timer.

3. Selecting the Key Input Switches to Control the Chosen Loads

3B. Setting Input Keys as Dimmer Switches

3C. Setting Input Keys as Timer Switches

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 45 46

Pas de commentaire

Clipsal 5800WCGA Informations techniques Page 35