Clipsal C-Bus2 Spécifications télécharger pdf (Page 46)

C-BUS TRAINING MANUAL - VOL 2

5.2 Day Time Movement Detection

This activates a group whenever the ambient lighting level is above the threshold set on the light

level sensor, and movement is detected. The selectable group is located next to the PIR Day Move

function. A timer can be used to perform an action (such as switch a group off) a deﬁnable period of

time after movement is detected. Timer options can be seen in (Figure 7). They are accessed via the

properties button.

Figure 7 – Timer options

5.3 Night Time Movement Detection

This activates a group whenever the ambient lighting level is below the threshold set on the light

level sensor, and movement is detected. The selectable group is located next to the PIR Night Move

function. A timer can be used to perform an action (such as switch a group off) a deﬁnable period of

time after movement is detected. Timer options are accessed via the properties button.

5.4 Sunset to Sunrise

The PIR sensors have a PIR Sunset function, which can switch lights on at sunset. The selected

group is switched off after a timer expires or sunrise, whichever occurs ﬁrst. Timer options are

accessed via the properties button.

5.5 Security Features

PIR Sensors also have a security feature which sends a short pulse intended to drive a buzzer or light

to indicate movement at any time, irrespective of the light threshold.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 119 120

Pas de commentaire

Clipsal C-Bus2 Spécifications Page 46