Clipsal C-Bus2 Spécifications télécharger pdf (Page 65)

2C. Advanced Programming

2.5 Blocks Tab

The Block table (Figure 12) displays the operating congureuration of the wall switch. Each row in

the table allows a Group Address to be associated with one or more input buttons. It is here that the

Recall levels, Timer value and Expiry key function are specied. LED indicator assignments are also

speciﬁed in the Block table.

Figure 12 – Editing a C-Bus

Neo

Wall Switch, with the Block tab selected

2.5.1 Recall Levels

Recall 1 and Recall 2 contain levels which are stored in non-volatile memory. These are used by the

Recall 1, Recall 2, Ramp Recall and Memory Toggle key functions. The levels stored in Recall 1 and

Recall 2 may be overwritten by the Memory Toggle or Store 1 key functions.

2.5.2 Expiry

The Expiry is the key function to be called when the timer expires. For example, Off Key would switch

the output off. This is not used when the Timer is set to a value of 0h0m0s.

2.5.3 LED Assignment

The indicator LEDs of the buttons are normally assigned to the same Groups as the buttons

themselves (Buttons (Keys) using Block). However, it is possible to assign the indicator LEDs

to another Group.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 119 120

Pas de commentaire

Clipsal C-Bus2 Spécifications Page 65